20 years focusing on recycling

  • +86-0512-58810860

Wood shredder and wood chipper difference

Views: 8195 Author: Site Editor Publish Time: 2019-06-03 Origin: Site

Introduction:

Each day new ideas and innovations have been introduced in the waste management field. This has leaves to a lot of confusion and inconvenience among the buyers. It remains a headache to specify which one to buy a Shredder or a grinder or a crusher or chippers?


When it comes to wood waste management, it is more complicated to say the difference. Knowing the wood shredder and wood chipper difference is a useful and beneficial thing.


Wood Shredder:

Wood Shredder is one, which is used in reducing the size of the wood and lumber. They are similar to that of the wood chipper but are suitable only at a lower level.


Wood chipper:

Wood chippers are used at the industrial level for cutting and to reduce bigger and bulkier Woods and lumber. They are mostly used in sawmills.


Wood Shredder and wood chipper difference based on factors

It will be easier to decide, once you identify. Based on,

– The engine type

– Reduction ratio

– Number of blades and

– Vacuum attachments


Are the main things to be considered. If one master these specifications then it will be a bull’s eye to see wood shredder and wood chipper difference.


The engine type:

The electric motor and gas-powered motor engines are the two important and widely used engine types in the wood chippers and Shredders. They both have their own advantages and disadvantages. However, it is wise to select electric motor wood Shredder as they are easy to maintain and less expensive. They are more suitable for indoor and home usage.

Gas powered wood chippers are best for industrial and commercial purposes as they are well built and require a lot of space to store them.


Reduction ratio:

A machine's efficiency is decided by the reduction ratio of the material. In the same way, the wood shredder and the wood chipper difference can also be known using the reduction ratio. The wood Shredder reduction ratio will always be less than that of the wood chipper.


The number of blades:

Blades present in the machine determine the reduction ratio of the material and are the most important part of the machine. The higher the number of blades the finer the resulting particle. The wood chipper will have a high number of blades than that of the wood Shredder. And so they are more likely to be used in bulkier waste management such as industrial and mill waste.


Vacuum attachments:

The vacuums have been added in some shredders as they help to lessen the time consumption for the process. It may seem little but the usage is more than one can imagine. They are available in both Shredder and chippers.


Apart from these one can identify the wood shredder easily by their appearance. Though they resemble the chipper very much they are less built than the chipper and have blunt bladed when compared to the chipper. They also have a smaller engine than the chipper.


Conclusion:

The above said wood shredder and wood chipper differences are only basic information and for knowledge purposes.


In order to better provide you with a professional answer, when sending an inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.), we will reply to you as soon as possible!

wanrooetech inquiry now