How to improve the service life of the plastic crusher

How to effectively extend the life of plastic crusher and plastic shredder? Today to talk to you about how to effectively extend the life of plastic crusher, plastic crusher, waste plastic crusher for boxes, thin pipe fittings, blow molded parts, bottles, shells and other waste plastic crushing recycling or as an auxiliary machine for injection molding machine water mouth material or sub-parts of the injection molding machine to re-crush the use. Reasonable use, effectively extend its life.

Methods to improve the service life of plastic crusher

1.Plastic crusher should be placed in a ventilated position to ensure that the heat of the motor work is distributed to extend its life.

2. the machine should be kept well grounded.

3.The bearings should be regularly filled with lubricant to ensure lubrication between the bearings.

4. regularly check the tool screws, brand new machine after 1 hour of use, with tools to tighten the dynamic knife, fixed knife screws, strengthen the blade and knife frame between the fixity.

5.Before the second start, the remaining debris in the machine room should be cleared to reduce the starting resistance. Should regularly open the inertia cover and pulley cover, clear the flange below the ash outlet, as the crusher room discharge powder into the shaft bearings.

6. in order to ensure the sharpness of the cutter, should always check the tool to ensure its sharpness, to reduce unnecessary damage to other components caused by the blunt lack of knife blade.

7.When replacing the knife, the clearance between the moving knife and the fixed knife: 0.8MM is good for crushers above 20HP, and 0.5MM is good for crushers below 20HP. The thinner the recycled material is, the gap can be adjusted appropriately larger.

8.Check the belt regularly for looseness, and adjust the tightness in time.

9.When the new machine is in use, open the crushing chamber every 4 days with shutdown and re-tighten the nuts of the blades one by one with a wrench.