Comparison of three types of medical waste management treatment

There are three types of medical waste management and treatment processes used internationally: medical waste crushing followed by sterilization, medical waste crushing while sterilizing, and medical waste sterilization followed by crushing.

Crushing followed by sterilization-Medical waste shredder autoclave in one machine

Using first crushing and then sterilization processing survey results show that crushing is carried out in an airtight environment, crushing process a large number of hematogenic pathogens is completely sealed within the all-in-one machine. Sterilization process after crushing, the entire crushing part is also sterilized, so it is not easy to occur the leakage of blood-borne pathogens and produce the spread of germs, and extremely easy to repair and maintenance. Moreover, the crusher is easy to clean and disinfect after contamination.

Sterilization and crushing at the same time

Automated medical waste high temperature steam sterilization treatment system

The track is manually pushed or automatically delivered, and then sterilized the broken process. This is currently the most widely used medical waste treatment technology in the country. The medical waste is loaded into a special sterile vehicle and overall into the sterilization chamber for sterilization. After processing, the waste was poured into the crusher for destruction treatment, and then rescued the reduced damping.

Medical waste treatment system features:
   ● For large and medium-sized centralized treatment plants, suitable for the concentrated treatment of medical waste
   ● Professional anti-corrosion technology, equipment average service life is up to 15 years
   ● Exhaust gas waste liquid integrated treatment technology, the overall energy consumption is reduced
   ● Specious control technology to achieve similar technology levels in Europe and America
   ● Operation intelligence, processing process is automatic, PLC computer control (sterilization temperature, time can be adjusted according to actual requirements)
   ● It can realize the automatic charge, unloading, sterilized vehicle of medical waste, the transfer and cleaning of the turnover box, no need to manually intervene, can effectively reduce the number of equipment operators and reduce labor intensity. Establishing infections caused by direct contact with medical waste.
   ● Can avoid the spread of the pre-bacterial pellets in medical waste
   ● Sterilizer is more likely to meet the requirements of medical waste treatment, continuous or intermittent operation can be achieved.

Sterilization before shredding

Centralized medical waste high-temperature steam processing kit is suitable for medical waste centralized disposal of large and medium-sized cities, and single can meet the disposal requirements of 1 ton - 20 tons of day treatment. The complete set of equipment fully meets the requirements of Medical Waste Management, with a disposal temperature of 134 ° C, 45 minutes for disposal, and the sterilization rate can reach 99.999%, and the supporting equipment to ensure that the sterilized medical waste will be reduced. Type, the final material is safely landfilled. Wantroche Medical Waste High-Temperature Treatment Equipment Introduces US Technology, using vacuum technology to improve malodor in the process of disposal.