Four Methods To Solve The Blockage Of Plastic Crusher Machine

The reasons for the blockage of the feed port in the use of plastic crushers are generally as follows. Now come to see how to solve the blockage problem:
1. The discharge pipe may be blocked or blocked, which will make the outlet of the plastic crusher blocked.
Improper matching of conveying equipment will also cause the discharge pipe to be blocked after the wind is weakened or no wind.
Solution:  is to clear the feed port, change the mismatched conveying equipment, adjust the amount of feed, and make the equipment run normally.
2. Blade disconnected, aging, screen hole closed, broken, too high water content of crushed material will make the plastic crusher blocked.
Solution: The broken and seriously aging blades should be updated regularly, and the screen should be checked regularly, and the water content of the crushed material should be less than 14%.
3. The plastic crusher is not suitable for the plastic in the structural design.
Solution: in the purchase of plastic crushers, it is best to be able to test the materials they need to be broken.
4. It may be that the feed speed is too fast and the load increases, resulting in blockage.
Solution: The current of the plastic crusher is generally controlled at about 85% of the rated current.

Features of plastic crusher:
The plastic crusher is easy to operate, and even beginners can quickly get started. The blade replacement is simple and quick, reducing equipment downtime; The wide flat blade structure is designed specifically for crushing large volume thin-walled and thin material plastic products, greatly improving crushing efficiency; Equipped with electronic control safety design, the double-layer structure of the hopper contains sound insulation materials to reduce noise, the motor has overload protection device to prevent damage, and the power equipment is energy-saving and durable, balancing economic benefits and environmental protection needs.

Plastic crusher application:
Plastic crusher is suitable for recycling plastic such as boxes, thin pipes, blow molding parts, bottles and shells. Plastic factory, electronics factory, plastic container factory, lighting factory, shoe factory, electrical factory, automobile parts factory, bags factory, granule factory, waste recycling factory, plastic furniture factory, plastic cabinet factory, ABS, PMMA, POM, nylon, hard glue head material, horn, fiber material and other hard plastic crushing process.

In order to better provide you with a professional answer, when sending an inquiry, please describe your parameters or technical requirements (such as processing materials, output size, capacity, etc.), we will reply to you as soon as possible!